hello. I have DL580 G7 server (windows 2008 32bit) and now on boot it shows me following message: Slot 0 HP Smart Array P410i Controller (1024MB, v6.64) 1 Logical
Re: Disk Drive Firmware Update Recommended 8.20 didn't helped, since this BF03685A35 disk should be too old for 8.20 firmware update cdrom. Just called HP support and they suggested to search for BF03685A35 in products, and i've found link to firmware update, will try and report back soon.
I am using an HP ProLiant DL380 G6, and when I boot the server, I see this message: "A firmware update is recommended for this physical drive." The two models the prompt lists are "HP DG146BAAJB" and "HP DG0146BALVN". I ran the latest Service Pack for ProLiant that is supported (version 2017.04.0) and updated everything it listed, but this ...
The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated. Added support for UEFI (Universal Extensible Firmware Interface) based servers.
The firmware component installer can now install the drive firmware successfully when the new HP ProLiant Smart Array HPCISSS3 Controller Driver (hpcisss3.sys) is running on the system being updated. Version:HPDD (12 Mar 2013)
* RECOMMENDED * Systems ROMPaq Firmware Upgrade for HP ProLiant ML150 G3 Servers. By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
This guide describes the Service Pack for ProLiant (SPP) and how to use it to update firmware, drivers, and system software on HPE ProLiant, HPE BladeSystem, HPE Synergy, and HPE Apollo servers and infrastructure and is intended for individuals who are familiar with configuring Microsoft Windows, Linux, and VMware, and maintaining and deploying server and infrastructure updates.
· About Smart Array P400i controller battery issue, first try to update firmware for this controller and wait for atleast 24 hrs powered-on time to charge the battery. If nogo then replace the battery. About Seagate hard drive, only HP drives are tested and works on ProLiant servers. Other brand hard drives wont work because the firmware on those ...
· We have a few EG0600FDBDU drives in our ProLiant server. One has been in for it's whole life and kept up to date (currently HPDA), but we have just replaced another failed drive with one of these and it has shipped with HPD6. The server warns me that HPD7 is the recommended minimum, but I'm happy to update it to HPDA.
Download the latest drivers, software, firmware, and diagnostics for your HP products from the official HP Support website.
One today is worth two tomorrows.